Stego Crete Claw Tape
  • Stego Crete Claw Tape
  • Stego-Crete-Claw-Field-02.jpg
  • Stego-Crete-Claw-Field-03.jpg

Stego® Crete Claw® Tape 6"

Mechanically Seal Membrane To Cast Concrete Slab

Stego Crete Claw Tape is a multi-layered tape that is used to seal Stego Wrap to the underside of the slab while the concrete is placed. Stego Crete Claw Tape allows wet concrete to cast into the textured top surface to form a mechanical bond/seal. This is useful in void/carton form applications and/or when soil movement may later occur.

Its many features include:

  • Dimensions: 6" x 180'
  • Comprised of a polyethylene film, aperture film, and an acrylic, pressure-sensitive adhesive
  • When applied to seams and along the perimeter, bonds the vapor barrier to the under-side of the slab and holds it there after soil or void/carton form movement.
  • Made in the USA
6" x 180' Roll - $160.98

HOW TO BUY >

  • Details
  • Accessories
  • Videos
  • Case Studies
New call-to-action

Stego Crete Claw Tape is an innovative and economical accessory that seals Stego Wrap to concrete while the concrete is placed and hardens. Applications of Stego Crete Claw 6” Tape include: bonding Stego Wrap to the underside of the slab and holding it in place after soil or void/carton form movement; can also be used for sealing of perimeter and terminating edges of Stego Wrap. This multi-layered tape mechanically seals Stego Wrap to concrete cast against it to help you hold Stego Wrap to the underside of the concrete and meet the requirements of ASTM E1643.

APPLICABLE STANDARDS American Society for Testing & Materials (ASTM):  

    • ASTM E1643: Standard Practice for Installation of Water Vapor Retarders used in Contact with Earth or Granular Fill under Concrete Slabs
    • ASTM F1249: Test Method for Water Vapor Transmission Rate through Plastic Film and Sheeting using a Modulated Infrared Sensor
    • ASTM D903: Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

Physical Properties:

    • Total Thickness: 26 mil
    • Permeance: 0.03 perms
    • 180 Adhesion Peel Strength - ASTM D903: 17.6 lbf/in
    • Sheer Adhesion Strength: 49 lbf/in2*

      *Specimens failed by stretching vapor barrier to failure before pulling Stego Crete Claw Tape from concrete. Note: perm unit = grains/(ft2*hr*in-Hg)

Additional Benefits:

    • Great product to bond and hold Stego Wrap to the underside of the concrete slab, even after soil movement and/or when slabs are cast on void/carton forms
    • Place Stego Crete Claw Tape anywhere on the vapor barrier that you want, to form a bond between the vapor barrier and fresh concrete
    • Quick and easy to install
    • Available nationwide
New call-to-action

Stego has the accessories you need to complete an ASTM E1643-compliant installation. Stego Tape, Stego Mastic, Stego Crete Claw Tape and StegoTack Tape enable efficient vapor barrier installations, saving time and resources.

Stego-Tape-Thumb

Stego Tape

A low permeance tape designed for use...

Details
Stego Mastic

Stego Mastic

A liquid applied vapor retardant membrane...

Details
Crete-Claw-Tape

Stego Crete Claw Tape

A multi-layered tape...

Details
StegoTack-thumbnail

StegoTack

A double-sided adhesive strip used to bond...

Details
New call-to-action
New call-to-action
To Request a sample or Literature
Click Here
Search our Product
Stego Industries

Have questions? We're here to help.

877-464-7834

Thank yo